Torque Transducer
for Static Applications

Type DRT 1

The torque sensor DRT 1 was developed for measureing of non rotating torque. This sensor can be mounted in any position. For adaption the specimen, different connectors are available.

The measuring shaft is protected from bending forces because of strain gauges in special configuration and an additional bearing.

It distinguishes with the following special features:

*unsensitive to bending forces

*extra rugged construction

*exchangeable connectors

Mechanical dimensions:

Technical specifications:

Measurement Range: 2; 5; 10; 12; 20 Nm

Option: (p)assiv

Supply Voltage: 12 V max.

Current Consumption: 35mA max.

Voltage Output: 1mV/V

Nonlinearity: <0,1%

Hysteresis: <0,1%

Iternal Resistance: 350 W nominal

Compensated Temperature

Range: 5-45°C

Operating Temperature: 0-60°C

Temperature fault:

Zero Point: 0,02%/K

Sensitivity: 0,01%/K

Mechanical Overload: 100%

Connection: 6 Pin Fitted Connector

Protection: IP40 conform with DIN 40050

Available Connectors: Hexagonal Connector-SW 5,5 - SW 13 DIN ISO 272

Square Connector -1/4“ DIN 3121- H

Ordering Example: DRT1 p -10-1/4“

Torque transducer passiv, measuring range 10 Nm, Square Connector -1/4“ DIN 3121- H

Please ask for connectors not listed above.

Available Accessories:

Connectors, measuring cable, supply and display unit